Hi there, A couple of questions: 1.-Do you hav any experience installing Centos in IGEPV2? 2.-Any "howto" on controlling relays from IGEPv2 Board? Thx ;-)...

I own a J990 without wifi. I am trying to access as many of the GPIOs as is possible. in running through the echo to direction and echo to value permutitions I ran into several GPIO pins that either do not work as intended or don't work ...

Hi, We are working with IGEPV2 board with expansion board. Current yocto image doesnt support gstreamer with TI Codecs actually I didnt find. "gst-inspect | grep TI" returns nothing also there is no support for v4l2src. We need a image t...

Hello, On some IGEPv2-RF boards, it is not possible to connect on configured WiFi AP with hostapd, and following some retries, it ends on issues in dmesg like panic and hardware errors (full dmesg log attached). ... [ 1277.29...

Hi, How can I compile qt4 embedded with opengl support for igepv2 on framebuffer? Could you give sample of qt compile options and sgx compile with igepv2 sdk? Umit....

Hi, I use IGEPV2 board to develop my custom board and on this board I use TPS65023 pmic. Kernel fails to initialize with default igepv2 board because of that I am trying to change board-igep0020.c source file in kernel dir (/arch/arm/mac...

Hi, I need u-boot bsp of igepv2, i saw some images but they doensnt support above 800mhz. I think this problem is passed, where can i find u-boot for igepv2 and tutorial to create a sd card with u-boot? Best regards...

I have a USB peripheral (IO module) in my system which is not responsive upon boot fairly often. Some of the time reenumeration (unbind / bind) will resolve this, but not always. I would like to be able to cycle the USB power to the device to attempt...

Hi, I start working with IGEPv2-RF60 board and Wilink8 WiFi module, and then i follow this tutorial: http://labs.isee.biz/index.php/Linux_Ker...

Does anyone have a STP file for the IGEPv2 RF they would like to share?...

Hello, I want to enable I2C2 of J990. I have comment in /boot/Igep.ini buddy = igep0022 cause i need gpio136 and gpio157 as input ( i think is used as reset for igepv2 expansion ). How i can enabling I2c2? Thanx!!!...

Hi, I would like to know if the IGEPv2 can handle Ubuntu 14.04 correctly (drivers included). I also look for a easy guide of installation of Ubuntu on the IGEPv2. Thanks...

We are using the Igepv2 in our systems. I wanted to make a unified release for both, Revision C and F boards using the mainline 4.4.2 kernel. All is working OK, using u-boot with according DTB for Rev C and Rev F. We have a time series r...

Dear sirs, I would like to implement "target tracking algorithm" on IGEPv2 platform. My testing diagram as below: A/V camera --> IGEPv2 expansion board --> IGEPv2 --> HDMI LCD touch-screen. Please show me which should I...

Hi, I'm designing a cape for igepV2, and I need to know the max current can support pin 2 of J990 (V_5CC)...