Could not compile stylesheet for simplistic. Using last compiled stylesheet.
Linux Kernel
IGEP Linux Kernel, modules, build
Total Posts: 17
Moderators: admin, mcaro, Marcus, afontquerni, eballetbo, pau pajuelo, amartinez, chema, eva
-
IGEP wilink8 module
Questionposted in Linux KernelHi, To use new IGEP board : Module Compact wireless wilink8.0 Linux omap 2.6.37.12 Tool chain : arm-arago-linux-gnueabi Use by default : igep00x0_wilink8_defconfig (see attachment file) when i run mak... -
Can't set input voltage on GPIO
posted in Linux KernelWe have a GPS sending a pulse every second to GPIO 140, which has the MUX set and is input-enabled. With the stock kernel it works. The OMAP detects it, and an oscilloscope attached to the J990 pin sees the pulse. With the debug kernel w... -
UART2 and TWL4030 relationship?
Questionposted in Linux KernelUnder the 2.6.37.6 stock kernel I have UART 2 working properly (as /dev/ttyO1) after manually setting the appropriate MUX's, disabling the WiFi, etc. as mentioned in instructions elsewhere. However, I would like to "take over" the "soun... -
TLV320AIC3106 second alsa card & kernel
Questionposted in Linux KernelDear isee forum I was wondering if someone can help on how to start enabling TLV320AIC3106 in the kernel I've use beaglebone audio cape schema -
Trying to understand TLV4030 & igepv2 kernel modifications
Clarificationposted in Linux KernelDear ISEE team, Please, let me open this thread in the hope that you'll be able to clarify iegpv2 kernel modifications. In particular I want to understand the kernel TWL4030 architecture (only the audio part). Bassically I've... -
SPI bus 3&4 on IGEPv2 (nowifi) issues
Issueposted in Linux Kerneleballatbo in the freenode.net#igep has been helping me with this issue and requested I post the details here. End goal: to use SPI busses 1, 3 and 4 on the IGEPv2 (nowifi) Reproduction: -
Compile linux kernel
Issueposted in Linux KernelHi all, I've got a problem, when I install Xenomai kernel from this site: http://wiki.jhu... -
What value should be used for KBUILD_MODNAME in linux kernel headers?
Questionposted in Linux KernelI am trying to build a driver for a usb serial barcode scanner in the IGEP SDK Virtual Machine. I cannot find the value I should use to define KBUILD_MODNAME. This token is used throughout linux header files in but is never defined. Does anyone know ... -
Bluetooth configuration with GSM/GPRS and Serial port (GPS) working
Acceptedposted in Linux KernelDear ISEE Community I'm using for my project GPRS antena and serial port to receive my GPS data. For the GPRS, asa you descript in the web ( -
Use DM3730 Wifi as AccessPoint
posted in Linux KernelDear ISEE Community. Is possible to use the wifi as Access Point? In case of a positive answer, how can I put the wifi module as Access Point with a security key (WEP, WAP or WAP-2) ?... -
Compile a vanilla kernel for IgepV2
Issueposted in Linux KernelHi all. I need to compile a vanilla kernel for IgepV2, because I want to path the kernel with Xenomai 2.6.3 (version 2.6.0 is plenty of bugs). First of all, I wanted to test if this kernel works fine (without Xenomai) on the Igep, and the, patc... -
CONFIG_WEXT_PRIV and 2.6.37-5 kernel
posted in Linux KernelI'm upgrading to the new kernel, and trying to recompile the device driver for the D-Link DWA-125 WiFi device that I use. It compiled under 2.6.35.13-5 but the same driver fails to do so under 2.6.37. I've traced the problem to the fact ... -
usb otg speed problem
posted in Linux KernelHi, I am testing the USB OTG speed and here are the results of hdparm on a USB disk: -on usb host: hdparm -t -T /dev/sda /dev/sda: Timing cached reads: 634 MB in 2.00 seconds = 316.60 MB/sec Timing buffered disk reads: ... -
build kernel 2.6.37 modules
posted in Linux KernelWhen I try to install the kernel modules I get a bunch of prompts like /usr/bin/make -C /home/bernhard/development/trunk/output/kernel/2.6.37-5/source O=/home/bernhard/development/trunk/output/kernel/2.6.37-5/build/. modules_install... -
Binary Kernel Modules 2.6.37-5 (20121123): fuse missing
posted in Linux KernelHi, I'm use kernel and modules provided in the wiki (http://labs.isee.biz/index.php/Linux_Kernel_2.6.37.y), but with this fuse module is missing. If I try to modprobe ... -
CPU speed 600MHz instead of 720MHz
posted in Linux KernelHi. I've upgraded by IGEPv2 to x-loader 2.5.0-1 and kernel to v2.6.37-4, since then CPU speed is somehow limited to 600MHz. cpufreq-info shows me that available frequencies are up to 720MHz, but it refuses me to set higher frequency than... -
igep00x0_defconfig missing
posted in Linux KernelHi forum I'm building current kernel from isee git repos Seems that igep00x0_defconfig is not found (following wiki instructions...) Someone know where to find it, or I'm missing something?
- Page :
- 1
- Total Posts: 17
- Total Resolved Posts: 225
- Total Unresolved Posts: 1242
- Total Users: 7522
- Latest Member: gysyxety
- Online Users: 44 other guests