Could not compile stylesheet for simplistic. Using last compiled stylesheet.
Total Posts: 18
Moderators: admin, mcaro, Marcus, afontquerni, eballetbo, pau pajuelo, amartinez, chema, eva
-
Battery supported
posted in PeripheralsWhat type battery can be connected to the board? Can you put a link? Thanks.... -
second audio board on I2S MCBSP3
Questionposted in PeripheralsDear ISEE team! Today I'm writing you in the hope that you can help me My purpose is to use BeagleBone audio cape schema in order to design a igepv2 expansion board with second audio codec embed. Main changes are the 1V8 log... -
LCD screen and a touch screen 7"
posted in PeripheralsCould you recomend me a LCD screen and a touch screen 7"? Thanks.... -
igep and gumstix
posted in PeripheralsHello! Help council: it is necessary to launch the camera OV5642 on Igep com-module. There was a problem with drivers. I read that on the driver on this camera is at gumstix. I ordered e-CAM50_CU35x_GSTIX. I received the module and a disk with the me... -
Camera driver: how to start?
posted in PeripheralsHi, Im using exp-camr010 as an example. when I insmod mt9v034.ko nothing is happened. I have inserted printk at the beginning of the .probe() function, and it seems, that this function is not called. -
sound from the USB webcam
posted in PeripheralsHi, everybody!!! Possibility of audio delivery from the webcam interests. Whether it is possible? It is necessary to set up somehow alsa? Thanks.... -
How to enable ISP camera interface on J5
posted in PeripheralsI have built an image sensor board and am trying to use the V4L2 MT9T031 camera driver in drivers/media/video. I have CONFIG_VIDEO_OMAP3 and CONFIG_OMAP_MUX set in my 2.6.37-2 .config file. Do I need to set anything else either in the ke... -
Need Help on Hardware Selection
Questionposted in PeripheralsI need help on hardware selection... I'm trying to assemble a combination of a small camera, LCD screen (3-4 inch) and a processor board that has the power to process the camera feed with high FPS (similar to a digital view finder screen... -
LVDS connection board
posted in PeripheralsHi all, searching for a simple solution to connect lcd flat panels to the IGEPv2, I've found this BeagleBoard add-on board, available in bundle with 7" LCD + touch + am... -
Tvp5151 setup
posted in PeripheralsHi everyone, I'm trying to setup the tvp5151 video decoder by following this tutorial : http://labs.isee.biz/index.php/How_to_s ... eo_decoder -
wifi and bluetooth at the same time
posted in PeripheralsHello, My application needs both wifi and bluetooth communication. Doing the steps of the following page: http://labs.isee.biz/index.php/... -
can not send with 38400 baud, using java rxtx-libraries
posted in Peripheralshi, i've got a really wired problem, if i try to communicate with UART (38400 8N1) using the java serial implementation rxtx. i use the following example-code (from -
I2C2 timeout waiting for bus ready
posted in PeripheralsHello everyone! I'm trying to connect a temperature sensor to I2C2 on expansion connector J990 but I'm getting timeout errors. I've read that this could be due to the lack of pull up resistors and already added them but with... -
dont find serial ports, when using java rxtx api
posted in Peripheralshi, i like to use UART-Communication within a java application. i installed java jre6 and rxtx-libraries (RXTX-2.2pre2) sudo apt-get install librxtx-java the problem is my java program doesnt find any free serial ports. ... -
using a 1.1 USB device eating 500mA (without hub)
posted in PeripheralsHi Igep team, I'm trying to use a usb (1.1) device that needs 500mA. The method mentioned [url]http://forum.isee.biz/viewtopic.php?f=45&t=1282&p=2933&hilit=current#p4106[/url] is valid/tested? Also there are another method v... -
e-CAM50_DM37x on IGEPv2
posted in PeripheralsHi all, There is a way to use this camera (up to 720p) to the igepv2-RC (and +) or igep expension board, which allow to input HD video on DM3730 and get the max capability of this processor ? For more info : -
Connect TLV320AIC3254 to IGEPv2
posted in PeripheralsHello, I'm trying to connect TLV320AIC3254 codec to Igepv2, kernel version 2.6.37-2. The kernel driver related to codec works fine, dm3730 can communicate through control data bus (I2C2 from J990 connector) to the codec and I can work wit... -
SPI
posted in PeripheralsHi, I am using an IGEP module with kernel 2.6.35.13 and I\\\'m writing software to communicate via the SPI protocol. I\\\'m having trouble locating the SPI device, I expected it to be at /dev/spi? Is there a module which must be loaded?
- Page :
- 1
- Total Posts: 18
- Total Resolved Posts: 225
- Total Unresolved Posts: 1242
- Total Users: 7522
- Latest Member: gysyxety
- Online Users: 149 other guests