Could not compile stylesheet for simplistic. Using last compiled stylesheet.
0
Hi
i use a IGEPV2 board and try to erase flash after MMC boot but i meet an issue.
the kernel version is 2.6.35.13. the source files have been downloaded from IGE web site and i use the tool chain from IGEP.
The igep.ini file contains : "mtdparts=omap2-nand.0:512k(X-Loader),12m(Boot),511488k(Rootfs)"
At the power up the flash is not recognized and the following messages appears :
"IGEP: Unsupported NAND found"
"IGEP: Unable to find configuration in GPMC"
what is GPMC?
I made a copy of the debug window at the power up (attached file).
After the power up, no mtd devices appear in the /dev directory.
can you help me
thanks
julien
i use a IGEPV2 board and try to erase flash after MMC boot but i meet an issue.
the kernel version is 2.6.35.13. the source files have been downloaded from IGE web site and i use the tool chain from IGEP.
The igep.ini file contains : "mtdparts=omap2-nand.0:512k(X-Loader),12m(Boot),511488k(Rootfs)"
At the power up the flash is not recognized and the following messages appears :
"IGEP: Unsupported NAND found"
"IGEP: Unable to find configuration in GPMC"
what is GPMC?
I made a copy of the debug window at the power up (attached file).
After the power up, no mtd devices appear in the /dev directory.
can you help me
thanks
julien
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »